Jewelry is one of the most difficult items to shoot. The main reason is that it reflects light and light is the reason for the formation of images. A simple method is to use a scanner. If you don’t sell one or two eBay images and buy a camera. Find someone with a scanner. Cut the top and bottom of the box to 1 inch high so that the room is centered and the box prevents the scanner glass from touching the jewelry (jewelry photo editing) while blocking light. Press the button and turn.
If you already have a digital SLR camera (any digital camera with a removable lens), we can move on to the next level. I recommend building a shooting box. Of course, you can buy one for about $100.00, but you can get the same effect between $2.00 and $4.00. Decide which background color you want. Black, brown or white everything can work according to your preferences.
Many websites want money, so let’s start here. Look for a large piece of white paper. If necessary, you can place two tapes on the back so they are not reflected. It’s best to add a bit because the two pages will be mixed in the photo. Its base is about 10 inches and the back is about 90 degrees curved. You may need hard things to block. The next step in completing the lighting is to control the light. The end of the white fabric is almost transparent and the tent is made, one side is open for the camera, the rest is blocking light, we don’t use the flash, we will use continuous light for a simple WYSIWYG focus.
I will move the table to a large window or an open door. You want a bright light, but no direct light. Place the magazine to illuminate it. Place the jewel (jewelry photo editing) on a piece of white paper or a ring that the title can make. Take a thick piece of cardboard and cut a thin opening. Place it under the paper and cut the paper so that the ring fits into the box. I also want to add extra lights on both sides of the store. Reading lights and bare lights are good. It is best to shoot jewelry sideways. Move it until you see the picture you think is good.
The next step is to adjust the camera settings.
You may need to get a description of the setup menu, but they all have the same settings. First look at “M” and set the camera to manual. This will also determine the quality of the photo of Grande. You may need to cut it later, depending on how close you are to the lens, so you can focus on making the room more like a room. This will give you more information about the file and clearer, higher resolution images. Then I want to adjust the focus screen. Make sure the center focus (usually the red square) is active. You will fix this square with the perfect focus on the main part of the jewelry (jewelry photo editing) you want and usually the leading edge of the stone.
Then I will adjust the ISO to 400. This will allow the camera to use bright light, but will not add too much particles to the image. The next adjustment to the camera will be the opening. I want to see 4.5 or 5.6. This will give you enough depth of field to allow most of the loop to focus. If you use a long lens, the back edge will be a bit soft, but it will remain beautiful. The larger the number, the more photos you need, the greater the depth of field, and the greater the distance from the front to the back. It will start at a shutter speed of 125. A tripod will be very useful, or it can support the camera at the top of the chair. The key is to prevent it from moving when the shutter button is pressed. Make sure the LCD display is set in a small picture view with a chart next to it. Test to check the exposure. If the white area on the screen is flashing, you will be too exposed. Try moving the shutter speed faster or gradually increasing the number of apertures. Just do one to reduce the light in the image.
Do this until the blink of an eye stops. I usually take a dark step to make sure I don’t get too exposed. Now you should be very close to the correct exposure. If it is too dark, you should lower the shutter speed or change the ISO number. The last setting is white balance. I prefer custom white balance before shooting anything. White balance tells the camera what color of light is capable of reproducing the correct color of the shot. If you can do it correctly, otherwise set the camera to auto W.B. and wait for the best condition.
Take photos by adjusting the angle to get a different look. Pay attention to changes in light as the sun moves during shooting. Use a small white card attached to the jewel (jewelry photo editing service) to reflect more light into dark areas and black cards to block light from the light area. Light and shadow are good, allowing you to define the shape of an object and give it depth. Through practice, you will know how you look and repeat it every time you shoot.